.. _quickstart: Quickstart ========== Eager to get started? This page gives a good introduction in how to gets started with Flask. This assumes you already have Flask installed. If you do not, head over to the :ref:`installation` section. A Minimal Application --------------------- A minimal Flask application looks something like that:: from flask import Flask app = Flask(__name__) @app.route('/') def hello_world(): return "Hello World!" if __name__ == '__main__': app.run() Just save it as `hello.py` or something similar and run it with your Python interpreter. Make sure to not call your application `flask.py` because this would conflict with Flask itself. :: $ python hello.py * Running on http://localhost:5000/ Head over to `http://localhost:5000/ `_, you should see your hello world greeting. So what did that code do? 1. first we imported the :class:`~flask.Flask` class. An instance of this class will be our WSGI application. 2. next we create an instance of it. We pass it the name of the module / package. This is needed so that Flask knows where it should look for templates, static files and so on. 3. Then we use the :meth:`~flask.Flask.route` decorator to tell Flask what URL should trigger our function. 4. The function then has a name which is also used to generate URLs to that particular function, and returns the message we want to display in the user's browser. 5. Finally we use the :meth:`~flask.Flask.run` function to run the local server with our application. The ``if __name__ == '__main__':`` makes sure the server only runs if the script is executed directly from the Python interpreter and not used as imported module. To stop the server, hit control-C. .. admonition:: Troubleshooting The browser is unable to access the server? Sometimes this is unfortunately caused by broken IPv6 support in your operating system, browser or a combination. For example on Snow Leopard Google Chrome is known to exhibit this behaviour. If the browser does not load up the page, you can change the `app.run` call to force IPv4 usage:: if __name__ == '__main__': app.run(host='127.0.0.1') Debug Mode ---------- Now that :meth:`~flask.Flask.run` method is nice to start a local development server, but you would have to restart it manually after each change you do to code. That is not very nice and Flask can do better. If you enable the debug support the server will reload itself on code changes and also provide you with a helpful debugger if things go wrong. There are two ways to enable debugging. Either set that flag on the applciation object:: app.debug = True app.run() Or pass it to run:: app.run(debug=True) Both will have exactly the same effect. .. admonition:: Attention The interactive debugger however does not work in forking environments which makes it nearly impossible to use on production servers but the debugger still allows the execution of arbitrary code which makes it a major security risk and **must never be used on production machines** because of that. Screenshot of the debugger in action: .. image:: _static/debugger.png :align: center :class: screenshot :alt: screenshot of debugger in action Routing ------- As you have seen above, the :meth:`~flask.Flask.route` decorator is used to bind a function to a URL. But there is more to it! You can make certain parts of the URL dynamic and attach multiple rules to a function. Here some examples:: @app.route('/') def index(): return 'Index Page' @app.route('/hello') def hello(): return 'Hello World' Variable Rules `````````````` Modern web applications have beautiful URLs. This helps people remember the URLs which is especially handy for applications that are used from mobile devices with slower network connections. If the user can directly go to the desired page without having to hit the index page it is more likely he will like the page and come back next time. To add variable parts to a URL you can mark these special sections as ````. Such a part is then passed as keyword argument to your function. Optionally a converter can be specifed by specifying a rule with ````. Here some nice examples:: @app.route('/user/') def show_user_profile(username): # show the user profile for that user pass @app.route('/post/') def show_post(post_id): # show the post with the given id, the id is an integer pass The following converters exist: =========== =========================================== `int` accepts integers `float` like `int` but for floating point values `path` like the default but also accepts slashes =========== =========================================== URL Building ```````````` If it can match URLs, can it also generate them? Of course you can. To build a URL to a specific function you can use the :func:`~flask.url_for` function. It accepts the name of the function as first argument and a number of keyword arguments, each corresponding to the variable part of the URL rule. Here some examples: >>> from flask import Flask, url_for >>> app = Flask(__name__) >>> @app.route('/') ... def index(): pass ... >>> @app.route('/login') ... def login(): pass ... >>> @app.route('/user/') ... def profile(username): pass ... >>> with app.test_request_context(): ... print url_for('index') ... print url_for('login') ... print url_for('profile', username='John Doe') ... / /login /user/John%20Doe (This also uses the :meth:`~flask.Flask.test_request_context` method explained below. It basically tells flask to think we are handling a request even though we are not, we are in an interactive Python shell. Have a look at the explanation below. :ref:`context-locals`). Why would you want to build URLs instead of hardcoding them in your templates? There are three good reasons for this: 1. reversing is often more descriptive than hardcoding the URLs. Also and more importantly you can change URLs in one go without having to change the URLs all over the place. 2. URL building will handle escaping of special characters and unicode data transparently for you, you don't have to deal with that. 3. If your application is placed outside the URL root (so say in ``/myapplication`` instead of ``/``), :func:`~flask.url_for` will handle that properly for you. HTTP Methods ```````````` HTTP (the protocol web applications are speaking) knows different methods to access URLs. By default a route only answers to `GET` requests, but that can be changed by providing the `methods` argument to the :meth:`~flask.Flask.route` decorator. Here some examples:: @app.route('/login', methods=['GET', 'POST']) def login(): if request.method == 'POST': do_the_login() else: show_the_login_form() If `GET` is present, `HEAD` will be added automatically for you. You don't have to deal with that. It will also make sure that `HEAD` requests are handled like the `HTTP RFC`_ (the document describing the HTTP protocol) demands, so you can completely ignore that part of the HTTP specification. You have no idea what an HTTP method is? Worry not, here quick introduction in HTTP methods and why they matter: The HTTP method (also often called "the verb") tells the server what the clients wants to *do* with the requested page. The following methods are very common: `GET` The Browser tells the server: just *get* me the information stored on that page and send them to me. This is probably the most common method. `HEAD` The Browser tells the server: get me the information, but I am only interested in the *headers*, not the content of the page. An application is supposed to handle that as if a `GET` request was received but not deliver the actual contents. In Flask you don't have to deal with that at all, the underlying Werkzeug library handles that for you. `POST` The browser tells the server that it wants to *post* some new information to that URL and that the server must ensure the data is stored and only stored once. This is how HTML forms are usually transmitting data to the server. `PUT` Similar to `POST` but the server might trigger the store procedure multiple times by overwriting the old values more than once. Now you might be asking why this is any useful, but there are some good reasons to do that. Consider the connection is lost during transmission, in that situation a system between the browser and the server might sent the request safely a second time without breaking things. With `POST` that would not be possible because it must only be triggered once. `DELETE` Remove the information that the given location. Now the interesting part is that in HTML4 and XHTML1, the only methods a form might submit to the server are `GET` and `POST`. But with JavaScript and future HTML standards you can use other methods as well. Furthermore HTTP became quite popular lately and there are more things than browsers that are speaking HTTP. (Your revision control system for instance might speak HTTP) .. _HTTP RFC: http://www.ietf.org/rfc/rfc2068.txt Static Files ------------ Dynamic web applications need static files as well. That's usually where the CSS and JavaScript files are coming from. Ideally your web server is configured to serve them for you, but during development Flask can do that as well. Just create a folder called `static` in your package or next to your module and it will be available at `/static` on the application. To generate URLs to that part of the URL, use the special ``'static'`` URL name:: url_for('static', filename='style.css') The file has to be stored on the filesystem as ``static/style.css``. Rendering Templates ------------------- Generating HTML from within Python is not fun, and actually pretty cumbersome because you have to do the HTML escaping on your own to keep the application secure. Because of that Flask configures the `Jinja2 `_ template engine for you automatically. To render a template you can use the :func:`~flask.render_template` method. All you have to do is to provide the name of the template and the variables you want to pass to the template engine as keyword arguments. Here a simple example of how to render a template:: from flask import render_template @app.route('/hello/') @app.route('/hello/') def hello(name=None): return render_template('hello.html', name=name) Flask will look for templates in the `templates` folder. So if your application is a module, that folder is next to that module, if it's a pacakge it's actually inside your package: **Case 1**: a module:: /application.py /templates /hello.html **Case 2**: a package:: /application /__init__.py /templates /hello.html For templates you can use the full power of Jinja2 templates. Head over to the `Jinja2 Template Documentation `_ for more information. Here an example template: .. sourcecode:: html+jinja Hello from Flask {% if name %}

Hello {{ name }}!

{% else %}

Hello World!

{% endif %} Inside templates you also have access to the :class:`~flask.request`, :class:`~flask.session` and :class:`~flask.g` [#]_ objects as well as the :func:`~flask.get_flashed_messages` function. Templates are especially useful if inheritance is used. If you want to know how that works, head over to the :ref:`template-inheritance` pattern documentation. Basically template inheritance makes it possible to keep certain elements on each page (like header, navigation and footer). Automatic escaping is enabled, so if name contains HTML it will be escaped automatically. If you can trust a variable and you know that it will be safe HTML (because for example it came from a module that converts wiki markup to HTML) you can mark it as safe by using the :class:`~jinja2.Markup` class or by using the ``|safe`` filter in the template. Head over to the Jinja 2 documentation for more examples. Here a basic introduction in how the :class:`~jinja2.Markup` class works: >>> from flask import Markup >>> Markup('Hello %s!') % 'hacker' Markup(u'Hello <blink>hacker</blink>!') >>> Markup.escape('hacker') Markup(u'<blink>hacker</blink>') >>> Markup('Marked up » HTML').striptags() u'Marked up \xbb HTML' .. [#] Unsure what that :class:`~flask.g` object is? It's something you can store information on yourself, check the documentation of that object (:class:`~flask.g`) and the :ref:`database-pattern` for more information. Accessing Request Data ---------------------- For web applications it's crucial to react to the data a client sent to the server. In Flask this information is provided by the global :class:`~flask.request` object. If you have some experience with Python you might be wondering how that object can be global and how Flask manages to still be threadsafe. The answer are context locals: .. _context-locals: Context Locals `````````````` .. admonition:: Insider Information If you want to understand how that works and how you can implement tests with context locals, read this section, otherwise just skip it. Certain objects in Flask are global objects, but not just a standard global object, but actually a proxy to an object that is local to a specific context. What a mouthful. But that is actually quite easy to understand. Imagine the context being the handling thread. A request comes in and the webserver decides to spawn a new thread (or something else, the underlying object is capable of dealing with other concurrency systems than threads as well). When Flask starts its internal request handling it figures out that the current thread is the active context and binds the current application and the WSGI environments to that context (thread). It does that in an intelligent way that one application can invoke another application without breaking. So what does this mean to you? Basically you can completely ignore that this is the case unless you are unittesting or something different. You will notice that code that depends on a request object will suddenly break because there is no request object. The solution is creating a request object yourself and binding it to the context. The easiest solution for unittesting is by using the :meth:`~flask.Flask.test_request_context` context manager. In combination with the `with` statement it will bind a test request so that you can interact with it. Here an example:: from flask import request with app.test_request_context('/hello', method='POST'): # now you can do something with the request until the # end of the with block, such as basic assertions: assert request.path == '/hello' assert request.method == 'POST' The other possibility is passing a whole WSGI environment to the :meth:`~flask.Flask.request_context` method:: from flask import request with app.request_context(environ): assert request.method == 'POST' The Request Object `````````````````` The request object is documented in the API section and we will not cover it here in detail (see :class:`~flask.request`), but just mention some of the most common operations. First of all you have to import it from the the `flask` module:: from flask import request The current request method is available by using the :attr:`~flask.request.method` attribute. To access form data (data transmitted in a `POST` or `PUT` request) you can use the :attr:`~flask.request.form` attribute. Here a full example of the two attributes mentioned above:: @app.route('/login', method=['POST', 'GET']) def login(): error = None if request.method == 'POST': if valid_login(request.form['username'], request.form['password']): return log_the_user_in(request.form['username']) else: error = 'Invalid username/password' # this is executed if the request method was GET or the # credentials were invalid What happens if the key does not exist in the `form` attribute? In that case a special :exc:`KeyError` is raised. You can catch it like a standard :exc:`KeyError` but if you don't do that, a HTTP 400 Bad Request error page is shown instead. So for many situations you don't have to deal with that problem. To access parameters submitted in the URL (``?key=value``) you can use the :attr:`~flask.request.args` attribute:: searchword = request.args.get('q', '') We recommend accessing URL parameters with `get` or by catching the `KeyError` because users might change the URL and presenting them a 400 bad request page in that case is a bit user unfriendly. For a full list of methods and attribtues on that object, head over to the :class:`~flask.request` documentation. File Uploads ```````````` Obviously you can handle uploaded files with Flask just as easy. Just make sure not to forget to set the ``enctype="multipart/form-data"`` attribtue on your HTML form, otherwise the browser will not transmit your files at all. Uploaded files are stored in memory or at a temporary location on the filesystem. You can access those files by looking at the :attr:`~flask.request.files` attribute on the request object. Each uploaded file is stored in that dictionary. It behaves just like a standard Python :class:`file` object, but it also has a :meth:`~werkzeug.FileStorage.save` method that allows you to store that file on the filesystem of the server. Here a simple example how that works:: from flask import request @app.route('/upload', methods=['GET', 'POST']) def upload_file(): if request.method == 'POST': f = request.files['the_file'] f.save('/var/www/uploads/uploaded_file.txt') ... If you want to know how the file was named on the client before it was uploaded to your application, you can access the :attr:`~werkzeug.FileStorage.filename` attribute. However please keep in mind that this value can be forged so never ever trust that value. If you want to use the filename of the client to store the file on the server, pass it through the :func:`~werkzeug.secure_filename` function that Werkzeug provides for you:: from flask import request from werkzeug import secure_filename @app.route('/upload', methods=['GET', 'POST']) def upload_file(): if request.method == 'POST': f= request.files['the_file'] f.save('/var/www/uploads/' + secure_filename(f.filename)) ... Cookies ``````` To access cookies you can use the :attr:`~flask.request.cookies` attribute. Again this is a dictionary with all the cookies the client transmits. If you want to use sessions, do not use the cookies directly but instead use the :ref:`sessions` in Flask that add some security on top of cookies for you. Redirects and Errors -------------------- To redirect a user to somewhere else you can use the :func:`~flask.redirect` function, to abort a request early with an error code the :func:`~flask.abort` function. Here an example how this works:: from flask import abort, redirect, url_for @app.route('/') def index(): return redirect(url_for('login')) @app.route('/login') def login(): abort(401) this_is_never_executed() This is a rather pointless example because a user will be redirected from the index to a page he cannot access (401 means access denied) but it shows how that works. By default a black and white error page is shown for each error code. If you want to customize the error page, you can use the :meth:`~flask.Flask.errorhandler` decorator:: from flask import render_template @app.errorhandler(404) def page_not_found(error): return render_template('page_not_found.html'), 404 Note the ``404`` after the :func:`~flask.render_template` call. This tells Flask that the status code of that page should be 404 which means not found. By default 200 is assumed which translats to: all went well. .. _sessions: Sessions -------- Besides the request object there is also a second object called :class:`~flask.session` that allows you to store information specific to a user from one request to the next. This is implemented on top of cookies for you and signes the cookies cryptographically. What this means is that the user could look at the contents of your cookie but not modify it, unless he knows the secret key used for signing. In order to use sessions you have to set a secret key. Here is how sessions work:: from flask import session, redirect, url_for, escape @app.route('/') def index(): if 'username' in session: return 'Logged in as %s' % escape(session['username']) return 'You are not logged in' @app.route('/login', methods=['GET', 'POST']) def login(): if request.method == 'POST': session['username'] = request.form['username'] return redirect(url_for('index')) return '''

''' @app.route('/logout') def logout(): # remove the username from the session if its there session.pop('username', None) # set the secret key. keep this really secret: app.secret_key = 'the secret key' The here mentioned :func:`~flask.escape` does escaping for you if you are not using the template engine (like in this example). Message Flashing ---------------- Good applications and user interfaces are all about feedback. If the user does not get enough feedback he will probably end up hating the application. Flask provides a really simple way to give feedback to a user with the flashing system. The flashing system basically makes it possible to record a message at the end of a request and access it next request and only next request. This is usually combined with a layout template that does this. To flash a message use the :func:`~flask.flash` method, to get hold of the messages you can use :func:`~flask.get_flashed_messages` which is also available in the templates. Check out the :ref:`message-flashing-pattern` for a full example.